Matt Thurber, editor-in-chief at AIN Media Group, has been flying since 1975 and writing about aviation since 1978 and now has the best job in the world, running editorial operations for Aviation International News, Business Jet Traveler, and FutureFlight.aero. In addition to working as an A&amp;P mechanic on everything from Piper Cubs to turboprops, Matt taught flying at his father’s flight school in Plymouth, Mass., in the early 1980s, flew for an aircraft owner/pilot, and for two summer seasons hunted swordfish near the George’s Banks off the East Coast from a Piper Super Cub. An ATP certificated fixed-wing pilot and CFII and commercial helicopter pilot, Matt is type-rated in the Citation 500 and Gulfstream V/550. Based in the Pacific Northwest, Matt and his team cover the entire aviation scene including business aircraft, helicopters, avionics, safety, manufacturing, charter, fractionals, technology, air transport, advanced air mobility, defense, and other subjects of interest to AIN, BJT, and FutureFlight readers.

Editor-in-Chief

Matt Thurber

Designing and manufacturing turbine engines is an enormously complex process, and OEMs such as GE Aerospace deploy significant amounts of money and resources to deliver a reliable and maintainable product with the performance needed by aircraft manufacturer and operator customers.
One of the subtle factors that most aviation industry observers might not be aware of is the effect of dust on turbine engines. In certain environments, dust is a critical factor and can hamper operations and engine life.
To ensure that its engines can safely handle these conditions, GE runs operational dust-ingestion tests to optimize for durability. These tests were done on earlier programs, as well as the Leap, and more recently on the Rise program’s high-pressure turbine airfoils.
According to GE, “Dust-ingestion testing uses a proprietary mix of sand and other particles developed by GE Aerospace.” Ordinary sand and dust particles gathered from Middle East environments weren’t suitable for engine testing, according to a GE spokesman, which is why the company needed to develop its own proprietary particles.
Once the particles are prepared, GE uses a specialized test rig to inject the dust into the engine during thousands of cycles of testing. This includes takeoff, climb, cruise, and landing. “The test campaign will replicate how the parts would withstand flight conditions in severe operating environments around the world, [which is] important for customer operations,” according to GE.
In a YouTube video about Leap development, GE explained that, in the Middle East, “fine dust can block cooling holes in our high-pressure turbine blades, creating greater material stress when the engine runs hot. Turning on those conditions in a test cell turned out to be very, very difficult.”
“You can’t just go out into an environment where we have challenges in the Middle East, scoop up a little dust, and throw it into the engine,” said Carlos Perez, general manager, services engineering. “It doesn’t work that way.”
Getting the GE-developed dust into the right place in the engine for the tests is difficult. “This is actually a critical scientific activity that took us 15 years and two PhD geologists to help us resolve.”&nbsp;Ultimately, there were 14 iterations and thousands of hours of testing of various dust blends on earlier engines before GE perfected the blend.

News and developments about aircraft engines, including turbofan, turboprop, turboshaft and piston.

GE Explores Dust Effects on Turbine Engine Development and Operations

Proprietary formula took more than 15 years to develop

One of the subtle factors that most aviation industry observers might not be aware of is the effect of dust on turbine engines. 

GE Explores Dust Effects on Turbine Engine Operations

2024 Corporate Aviation Leadership Summit

News and issues relating to business, corporate and private aviation, primarily regarding turbine-engine-powered airplanes and helicopters. Subjects include aircraft, engines, maintenance, operations, personnel, acquisitions, accidents, safety, security, and training.

One engine would be able to run at low-idle in a twin-engine helicopter application

FAA Proposes Special Conditions for PW220A Idle Cruise

Charles Alcock

Essential news and analysis on the defense aerospace business. Your trusted source for new and ongoing programs and requirements in military aircraft (manned and unmanned), engines, avionics, weapons and associated systems, including ground-based air defense.

Improved engine production and test facilities are mainly focused on military programs

Rolls-Royce Completes $1 Billion Engine Site Upgrade

News and developments about airplanes, helicopters and unmanned air vehicles used in all varieties of operations, including airlines, military, business, commercial, general aviation and private.

News about environmental issues relating to aircraft operations, including noise issues, emissisions, and regulations. See Fuel for biofuel.

News and issues relating to the aerospace industry that are related to the science, engineering and business of flight in space involving civil, industrial and military applications, and similar topics related to flight in the atmosphere of the Earth that are not covered more directly by other AINonline subject channels. In other words, both astronautical and aeronautical subjects, except for those aeronautical topics that are specifically covered elsewhere on this website.

The first hybrid-electric flights above 30,000 feet, as well as the first across the North Atlantic, GE says.

GE Aerospace and Beta Technologies Cross Atlantic in Hybrid-electric Saab 340B Commuter Aircraft

Australian start-up planned to convert Beechcraft Bonanza and 1900D aircraft

Lack of Funding Shuts Hydrogen Propulsion Pioneer Stralis

News and issues regarding all manner of civil and military rotorcraft and their powerplants, including helicopters, tilt rotors and unmanned air vehicles.

Turboshaft has flown more than 600 hours after first flight in March 2023

EASA Issues Type Certificate for AW09 Arriel 2K Engine

News and issues about aviation maintenance, repair and overhaul (MRO), covering all segments of the aviation industry; and modifications for aircraft and engines. Subjects include product support of aircraft, engines and avionics, MRO company mergers, acquisitions, announcements and personnel, Airworthiness Directives, Supplemental Type Certificate approvals and other topics.

News and information on safety procedures and concerns.

News and issues concerning general aviation, specifically airplanes and helicopters powered by piston and alternative engines (i.e., non-turbine powered aircraft). Subjects include aircraft, engines, personnel, acquisitions, accidents, safety, security and training.

NBAA-BACE 2025

In this article

GE Aerospace

More In Engines

FAA Proposes Special Conditions for PW220A Idle Cruise

One engine would be able to run at low-idle in a twin-engine helicopter application

Rolls-Royce Completes $1 Billion Engine Site Upgrade

Improved engine production and test facilities are mainly focused on military programs

GE Aerospace and Beta Technologies Cross Atlantic in Hybrid-electric Saab 340B Commuter Aircraft

The first hybrid-electric flights above 30,000 feet, as well as the first across the North Atlantic, GE says.

Lack of Funding Shuts Hydrogen Propulsion Pioneer Stralis

Australian start-up planned to convert Beechcraft Bonanza and 1900D aircraft

EASA Issues Type Certificate for AW09 Arriel 2K Engine

Turboshaft has flown more than 600 hours after first flight in March 2023

FAA’s Rocheleau Admits Unleaded Avgas Timeline May Slip

Deadline of Dec. 31, 2030 may have to be moved if a suitable fuel isn't available

Sikorsky and Safran Pledge Increased Collaboration

Proposal promises accelerated engine innovation

Canada Could Keep Gripen Engine Work at Home

GE and Magellan sign F414 support agreement

AIN Products

SUBSCRIPTIONS

RESOURCES

ABOUT AIN