Charles Alcock is managing editor of the AIN Media Group, having rejoined the company in 2019. He has been an aviation journalist since 1986, and previously worked for AIN from 1990 to 2017, most recently as editor-in-chief. His main focus is on covering new aviation technology and business models, as well as international news.
Having been raised in the London area, Alcock studied at the University of Manchester in the UK and earned an honors degree in Politics and Modern History. He speaks English and French, and some German.

Managing Editor

Charles Alcock

CFM International says it is achieving breakthroughs in ongoing efforts to reduce the maintenance burden for airliners powered by its Leap engines. On Monday, the manufacturer reported that it is increasing the availability of a reverse bleed system that is already on almost half of the Leap-1A turbofans.
The new system prevents carbon build-up on the fuel nozzles by circulating cooling air through the engine core after shutdown. CFM is awaiting imminent engine-level FAA certification of the technology for the Leap-1B model.
To boost what has been a disappointing time-on-wing performance for the engines, CFM has now shipped more than 1,200 durability kits for the Leap-1A’s high-pressure turbine (HPT), both on new-build engines and for fitting during overhauls. The GE-Safran joint venture claims the new hardware helps to increase the time between shop visits, resulting in a two-fold improvement in time-on-wing in severe environments and achieving comparable reliability rates to the widely used CFM56 engines.
According to Gaël Méheust, president and CEO of CFM International, these initiatives are especially important for operators in the Middle East, where fine desert dust suspended in the air builds up in the cooling passages of engines, shortening the life of components. “With more than 17,000 cycles of Leap dust testing to date, we’re confident that the design we’re delivering today is the hardware we’ll need to meet our customers’ expectations for time on wing,” he commented in an interview before the Dubai Airshow.
While acknowledging that there is more work to do in maturing the Leap program's reliability, Méheust insisted that his engineering team is making progress. He pointed to Cirium data showing that over the past 12 months, airliners powered by Leap engines have flown 25% more days than narrowbodies powered by the alternative Pratt &amp; Whitney Geared Turbofans.
At the same time, CFM said it is increasing production rates for the Leap engines, which it said were up 40% year over year in the third quarter. Méheust said he expects Leap deliveries for the whole of 2025 to be 20% higher than the 2024 output.
<h2>CFM56 Improvements, Rise Testing</h2>
More than 30 years after the first CFM56 turbofans entered service in the narrowbody market, the engine maker said it remains committed to increasing their value to operators by lowering ownership costs. In late 2023, it introduced a more durable HPT blade to extend time on wing and has already shipped more than 1,700 sets of the hardware.
“As with Leap engines, though, the more repairs we can do, the fewer spare parts we need, and the lower the maintenance cost,” Méheust explained. “That’s why we continue to industrialize new repairs. For example, by rolling out automated laser welding, we’re increasing part throughput and decreasing repair turnaround time for the prior-generation HPT blade by about a third.”
Meanwhile, CFM’s next-generation Rise engine is continuing its path to market, with more than 350 different types of tests completed to date, including assessments of its Open Fan architecture, compact core, high-speed turbine and compressor, and hybrid-electric systems. The company is striving to deliver a 20% reduction in fuel burn and CO2 emissions compared to today’s engines.
In October, dust ingestion tests began on Rise’s HPT airfoils, which CFM said is the earliest in any of its programs that it has conducted this level of real-world testing. Earlier this year, it completed more than 3,000 endurance cycles with the HPT airfoils.

News and developments about aircraft engines, including turbofan, turboprop, turboshaft and piston.

CFM Eases Leap Engine Maintenance Burden with Cooling and Durability Kits

FAA certification for reverse bleed cooling system now close

CFM initiatives such as the reverse bleed system and durability kits boost time-on-wing reliability for airliners with Leap family engines.

CFM Modifications Ease Leap Engine Maintenance Burden 

2024 Corporate Aviation Leadership Summit

Matt Thurber

News and issues relating to business, corporate and private aviation, primarily regarding turbine-engine-powered airplanes and helicopters. Subjects include aircraft, engines, maintenance, operations, personnel, acquisitions, accidents, safety, security, and training.

One engine would be able to run at low-idle in a twin-engine helicopter application

FAA Proposes Special Conditions for PW220A Idle Cruise

Essential news and analysis on the defense aerospace business. Your trusted source for new and ongoing programs and requirements in military aircraft (manned and unmanned), engines, avionics, weapons and associated systems, including ground-based air defense.

Improved engine production and test facilities are mainly focused on military programs

Rolls-Royce Completes $1 Billion Engine Site Upgrade

News and developments about airplanes, helicopters and unmanned air vehicles used in all varieties of operations, including airlines, military, business, commercial, general aviation and private.

News about environmental issues relating to aircraft operations, including noise issues, emissisions, and regulations. See Fuel for biofuel.

News and issues relating to the aerospace industry that are related to the science, engineering and business of flight in space involving civil, industrial and military applications, and similar topics related to flight in the atmosphere of the Earth that are not covered more directly by other AINonline subject channels. In other words, both astronautical and aeronautical subjects, except for those aeronautical topics that are specifically covered elsewhere on this website.

The first hybrid-electric flights above 30,000 feet, as well as the first across the North Atlantic, GE says.

GE Aerospace and Beta Technologies Cross Atlantic in Hybrid-electric Saab 340B Commuter Aircraft

Australian start-up planned to convert Beechcraft Bonanza and 1900D aircraft

Lack of Funding Shuts Hydrogen Propulsion Pioneer Stralis

News and issues regarding all manner of civil and military rotorcraft and their powerplants, including helicopters, tilt rotors and unmanned air vehicles.

Turboshaft has flown more than 600 hours after first flight in March 2023

EASA Issues Type Certificate for AW09 Arriel 2K Engine

News and issues about aviation maintenance, repair and overhaul (MRO), covering all segments of the aviation industry; and modifications for aircraft and engines. Subjects include product support of aircraft, engines and avionics, MRO company mergers, acquisitions, announcements and personnel, Airworthiness Directives, Supplemental Type Certificate approvals and other topics.

News and information on safety procedures and concerns.

News and issues concerning general aviation, specifically airplanes and helicopters powered by piston and alternative engines (i.e., non-turbine powered aircraft). Subjects include aircraft, engines, personnel, acquisitions, accidents, safety, security and training.

Dubai Airshow 2025

In this article

CFM

More In Engines

FAA Proposes Special Conditions for PW220A Idle Cruise

One engine would be able to run at low-idle in a twin-engine helicopter application

Rolls-Royce Completes $1 Billion Engine Site Upgrade

Improved engine production and test facilities are mainly focused on military programs

GE Aerospace and Beta Technologies Cross Atlantic in Hybrid-electric Saab 340B Commuter Aircraft

The first hybrid-electric flights above 30,000 feet, as well as the first across the North Atlantic, GE says.

Lack of Funding Shuts Hydrogen Propulsion Pioneer Stralis

Australian start-up planned to convert Beechcraft Bonanza and 1900D aircraft

EASA Issues Type Certificate for AW09 Arriel 2K Engine

Turboshaft has flown more than 600 hours after first flight in March 2023

FAA’s Rocheleau Admits Unleaded Avgas Timeline May Slip

Deadline of Dec. 31, 2030 may have to be moved if a suitable fuel isn't available

Sikorsky and Safran Pledge Increased Collaboration

Proposal promises accelerated engine innovation

Canada Could Keep Gripen Engine Work at Home

GE and Magellan sign F414 support agreement

AIN Products

SUBSCRIPTIONS

RESOURCES

ABOUT AIN