Kerry Lynch stepped into the role of editor of the&nbsp;Aviation International News&nbsp;monthly magazine in May 2022 after serving with&nbsp;AIN&nbsp;for eight years. She joined&nbsp;AIN&nbsp;in December 2014 as a senior editor covering Washington and business aviation news. She has also served on Convention News teams, including as editor of&nbsp;HAI Convention News. Lynch previously spent 25 years with Aviation Week. During her time there, she reported for and later steered&nbsp;The Weekly of Business Aviation, oversaw business aviation content on the&nbsp;Aviation Week Intelligence Network, served on the&nbsp;Show News&nbsp;staff, and held roles as the Washington columnist for&nbsp;Business &amp; Commercial Aviation&nbsp;and&nbsp;Overhaul &amp; Maintenance&nbsp;monthly magazines. In 2021 she was honored with the National Business Aviation Association Platinum Wing Award for lifetime achievement in journalism and was the 2004 recipient of the National Air Transportation Association’s Aviation Journalism Excellence Award. She also has been a recipient of an Aerospace Media Award for business aviation (2022) and NBAA Gold Wing Award (2003, 2024). Lynch graduated from The Ohio State University with a bachelor of arts in journalism.

Editor, AIN monthly magazine

Kerry Lynch

The U.S. FAA released the long-awaited proposed rewrite of Part 23 certification rules for small aircraft. Published in the March 14 Federal Register, the proposal is one of the most sweeping regulatory revisions in the FAA’s history, taking a new approach to certifying light piston, turboprop and jet aircraft.

 


The proposal is based on recommendations of a multinational industry/government rulemaking committee that established a goal of doubling safety while cutting in half the costs of certification. The proposal attempts to reach that goal by replacing the prescriptive approach to Part 23 certification with a more performance-based method. It also enables the use of consensus standards for new technologies that are established by an international standards committee composed of top government and industry experts. This committee is housed under the standards-setting organization ASTM.

 


The proposal would replace current weight and propulsion divisions in Part 23 with performance- and risk-based divisions for airplanes that seat up to 19 passengers and have a maximum takeoff weight of 19,000 pounds or less.

 


In addition, the proposal is aimed at addressing one of general aviation’s most pervasive safety issues: loss of control in flight. The proposed rulemaking calls for airworthiness standards to address certification for flight in icing conditions, enhanced stall characteristics and minimum control speed to prevent departure from controlled flight for multi-engine airplanes.

 


The FAA, which estimated the proposal to be “cost beneficial,” said the current prescriptive standards entail detailed design requirements based on airplane designs from the 1950s and 1960s. “As a result of this prescriptive framework, the FAA often requires a design approval applicant seeking to incorporate new or innovative technology to provide additional documentation that typically results in the FAA’s issuance of special conditions, exemptions or equivalent level of safety,” the agency said. “The FAA recognizes that these additional procedures and requirements are costly to the FAA and industry, act as barriers to certification and discourage innovation.”

 


<h2>Incorporating New Technologies</h2>

 


The proposed rulemaking, the agency said, would maintain the level of safety associated with current Part 23 and “hasten the adoption of safety-enhancing technology in type-certified products while reducing regulatory time and cost burdens for the aviation industry and FAA.”

 


“This proposal would streamline how we approve new technologies for small piston-powered airplanes all the way to complex high-performance executive jets,” said FAA Administrator Michael Huerta. “The FAA’s collaboration with industry and international partners reflects a performance-based, flexible approach which would accommodate today’s rapidly changing aviation industry and technological advances now and in the future.”

 


&nbsp;“General aviation is vital to the U.S. economy, and this proposal would benefit manufacturers, pilots and the general aviation community as a whole,” added Transportation Secretary Anthony Foxx in announcing the proposal.

 


The proposal must still go through a comment period (comments are due by May 13) before the final rule is released. The rulemaking is long overdue; Congress had directed the FAA to release the final rule before the end of last year.

 


While frustrated by the bureaucratic processes that have slowed the progress of the rule, General Aviation Manufacturers Association president Pete Bunce remained encouraged by the efforts of the FAA to work with industry on the rule. “This proposal is the result of nearly a decade of work by the entire aviation community, and…will help improve general aviation safety and bolster the piston, turboprop and light jet market, as well as remove barriers to certification for new technologies such as electric and hybrid propulsion,” said Bunce after the proposed rule was released.

 


Bunce urged industry stakeholders to “respond quickly with meaningful comments and the FAA to engage with other aviation authorities so a harmonized and effective final rule can be issued by the current administration. If they do so, the FAA, through its leadership, can put in place a lasting legacy that will benefit general aviation safety and the vitality of the general aviation industry for decades to come.”

 


The Aircraft Owners and Pilots Association also offered support for the rulemaking, with president Mark Baker saying it includes “much needed and long overdue reforms.” At the same time the association pushed for further reforms to address barriers to installation of new safety equipment on legacy aircraft.

 


“We hope that this NPRM, along with policy changes already in place to support the installation of safety-enhancing equipment in GA aircraft, signals a new approach to regulation and certification,” Baker said. “With the GA fleet aging and just over a thousand new piston-powered GA aircraft being delivered each year, we must make it easier to upgrade legacy aircraft with…innovative safety technology.” 
 
	&nbsp;

News about bills, laws, regulations and other governmental decisions affecting aviation and aerospace. Topics include FAA re-authorizations, taxes on fuel and aviation activities, environmental legislation, ICAO decisions, governmental mediation of labor conflicts and World Trade Organization disputes and decisions.

FAA Releases Long-Awaited Part 23 Proposal

The proposal, one of the most sweeping rewrites in the agency's history, would reduce the time it takes to bring new technologies to market.

2024 Corporate Aviation Leadership Summit

News and issues relating to international air transport and cargo carriers, national airlines and regional airlines, including aircraft, engines, personnel, acquisitions, accidents, safety, security and training.

News and issues relating to business, corporate and private aviation, primarily regarding turbine-engine-powered airplanes and helicopters. Subjects include aircraft, engines, maintenance, operations, personnel, acquisitions, accidents, safety, security, and training.

Duffy served in Congress from 2011 to 2019

Former Rep. Duffy Selected for Transportation Secretary

AmyWilder

Operators push for simpler fatigue-management rules

Canada’s Flight and Duty Time Regulations under Scrutiny

Thune formerly chaired the Commerce Committee and is well versed in aviation issues

Thune Move to Senate Majority Leader Draws Bizav Praise

Hanneke Weitering

News and developments about airplanes, helicopters and unmanned air vehicles used in all varieties of operations, including airlines, military, business, commercial, general aviation and private.

New developments and products in avionics, specifically about aircraft electronics in the cockpit.

Inflight refueling aircraft slated for first autonomous flight in 2025

USAF Approves Merlin's Airworthiness Plan for Autonomous KC-135

Tax issues among first anticipated on Capitol Hill's plate next year

Washington To See New Aviation Leaders in Next Congress

Tariffs, Schedule F, sustainability, audits all possible changes

New White House Sets Stage for New Aviation Policy

News about simulators and training procedures, as well as workforce.

News and issues relating to the aerospace industry that are related to the science, engineering and business of flight in space involving civil, industrial and military applications, and similar topics related to flight in the atmosphere of the Earth that are not covered more directly by other AINonline subject channels. In other words, both astronautical and aeronautical subjects, except for those aeronautical topics that are specifically covered elsewhere on this website.

Report identifies vulnerabilities in labor, materials, and infrastructure

Task Force Details Aerospace Supply-chain Weaknesses

Charles Alcock

News and issues concerning the aviation charter and fractional-ownership industries and markets, including company announcements, regulations, new developments and labor issues.

Issues regarding financing of aircraft; aviation insurance; tax issues for aircraft operators; new companies and people in the aviation financing and insurance industries.

More In Regulations and Government